国家高新技术企业
杭州市西湖区优秀创新人才“325”计划入选单位
杭州市高层次人才项目

18668047932    pg2020365

chinasupport@papergoing.com

登录 注册

KSCE Journal of Civil Engineering

ISSN: 1226-7988

官网: http://link.springer.com/journal/12205

出版商: Springer

Description:

The KSCE Journal of Civil Engineering is a technical monthly journal of the Korean Society of Civil Engineers. The journal reports original study results (both academic and practical) on past practices and present information in all civil engineering fields. The journal publishes original papers within the broad field of civil engineering, which includes, but are not limited to, the following: coastal and harbor engineering, construction management, environmental engineering, geotechnical engineering, highway engineering, hydraulic engineering, information technology, nuclear power engineering, railroad engineering, structural engineering, surveying and geo-spatial engineering, transportation engineering, tunnel engineering, and water resources and hydrologic engineering. Both theoretical and practice-oriented papers, including case studies and reviews, are encouraged. From 2018, the journal will be published monthly including two special issues, consisting of 50 papers per issue.

Title Scholar cited Year Review Cycle Accept Cycle
Comparison between change point detection methods with synthetic rainfall data and application in South Korea

Authors:Sangho Lee,Sang Ug Kim

Keywords:change point analysis,climate change,inhomogeneity,CUSUM,BCP,DP

DOI:10.1007/s12205-014-0228-5

Received:2014-05-06 ; Revised:2014-08-26 ; Accepted:2014-09-02 ; Online:2014-12-12

- 2016 3.3 4
Postbuckling behavior of stringer versus ring reinforced geometrically imperfect cylindrical shells under pure torsion

Authors:Isaac Du,Hailan Xu,David Hui,Guoqing Yuan

Keywords:buckling,postbuckling,cylindrical shells,stringer,ring,torsion

DOI:10.1007/s12205-014-0604-1

Received:2013-09-24 ; Revised:2014-01-05 ; Accepted:2014-01-31 ; Online:2014-12-12

- 2015 3 4.3
Effect of ionic strength and permeate flux on membrane fouling: Analysis of forces acting on particle deposit and cake formation

Authors:S. Vigneswaran,Dae-Young Kwon

Keywords:cross-flow microfiltration,membrane fouling,cake resistance,porosity,particle deposit,ionic strength,permeate flux

DOI:10.1007/s12205-014-0079-0

Received:2014-02-17 ; Revised:2014-08-17 ; Accepted:2014-09-16 ; Online:2014-12-05

- 2015 5.6 7
Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash

Authors:M. Albitar,P. Visintin,M. S. Mohamed Ali,M. Drechsler

Keywords:fly ash,geopolymer concrete,engineering properties,workability,tensile strength,elastic moduli

DOI:10.1007/s12205-014-1254-z

Received:2014-05-13 ; Revised:2014-07-02 ; Accepted:2014-07-03 ; Online:2014-12-05

- 2015 1.2 1.7
Selection of an optimal lattice wind turbine tower for a seismic region based on the Cost of Energy

Authors:Bora Gencturk,Arezou Attar,Cenk Tort

Keywords:wind turbines,structural optimization,lattice towers,seismic and wind load design,cost of energy

DOI:10.1007/s12205-014-1428-8

Received:2014-08-03 ; Revised:2014-10-10 ; Accepted:2014-11-04 ; Online:2014-12-01

- 2015 1.8 3.1
Rural bus route design problem: Model development and case studies

Authors:Shuaian Wang,Xiaobo Qu

Keywords:public transport,suburban bus route design,dynamic programming,optimization

DOI:10.1007/s12205-013-0579-3

Received:2013-09-15 ; Revised:2014-02-28 ; Accepted:2014-09-03 ; Online:2014-12-01

- 2015 5.1 11.8
Influence of the structural modification of polycarboxylate copolymer with a low dispersing ability on the set-retarding of Portland cement

Authors:Yubin Jun,Yeonung Jeong,Jae Eun Oh,Jongnam Park,Ju-hyung Ha,Seok Gyu Sohn

Keywords:copolymers,plasticizer,surfactants,setting time,hydration

DOI:10.1007/s12205-014-1189-4

Received:2014-04-10 ; Revised:2014-08-12 ; Accepted:2014-08-20 ; Online:2014-12-01

- 2015 3.7 4.4
Assessing the impact of Solids Retention Time (SRT) on the secondary clarifier capacity using the State Point Analysis

Authors:Oleyiblo Oloche James,Jia-Shun Cao,Amos T. Kabo-Bah,Gan Wang

Keywords:activated sludge,oxidation ditch,secondary clarifier,SPA,SRT

DOI:10.1007/s12205-014-0106-1

Received:2013-11-14 ; Revised:2014-05-26 ; Accepted:2014-09-02 ; Online:2014-12-01

- 2015 6 9.7
Simplified method for predicting the deflections of cable-stayed suspension bridges considering live loads

Authors:Jin Cheng,Ying Li

Keywords:cable-stayed suspension bridge,deflection prediction,simplified method,static analysis,finite element method

DOI:10.1007/s12205-014-1036-7

Received:2014-01-24 ; Revised:2014-06-24 ; Accepted:2014-06-28 ; Online:2014-12-01

- 2015 4.6 5.2
Determining hydraulic conductivity parameters of porous asphalt concrete using Bayesian parameter estimation

Authors:Kook-Hwan Cho,Sungho Mun

Keywords:hydraulic conductivity,porous asphalt,bayesian parameter estimation,latin hypercube

DOI:10.1007/s12205-014-1315-3

Received:2014-06-11 ; Revised:2014-07-06 ; Accepted:2014-07-12 ; Online:2014-12-01

- 2015 0.8 1